Hull fitting out completed
18 June 2020 Views of completed decks after fitting out
18 June 2020 Pulley systems for side ladders installed
17 June 2020 Fall anchors fitted inboard on boats 6 to 11
17 June 2020 Anchors and chains fitted to sides for’ard
16 June 2020 Spare anchors fitted to side aft
16 June 2020 Davits Liferafts installed – 2 large for’ard, 10 small midships
14 June 2020 Davits for boat numbers 4, 7, 8, 9, 10 and 11 and boats ready for completion
14 June 2020 Davits for boat numbers 4, 7, 8, 9, 10 and 11 installed, completed
13 June 2020 Davits numbers 3 fully and 4, 7, 8, 9, 10 and 11 bases only installed
13 June 2020 Steps fitted – 1 to starboard, 2 to port
11 June 2020 Davits rough cut and assembled
11 June 2020 Davits planned
30 May 2020 Railings fitted fore and aft
29 May 2020 Belaying pin racks and rope spools glued in place
29 May 2020 Canvas frames glued in place
28 May 2020 Deck fittings glued in place
28 May 2020 Deck fittings prepared and completed
28 May 2020 Active and reserve anchors rigged completed.
28 May 2020 Liferaft completed. Metal frame support cut, completed
27 May 2020 Liferaft cut and shaped from wooden section, painted
26 May 2020 Belaying pin racks varnished, locating pins completed, catheads cut, varnished
25 May 2020 Belaying pin racks rough cut, glued
25 May 2020 Rope barrels pepared and completed
24 May 2020 Single and double bollards rough cut then completed
24 May 2020 Scale deck plan with fittings placed
24 May 2020 Lockers completed, painted from scratch
23 May 2020 Ventilators completed, painted
23 May 2020 Ventilators rough cut, glued
22 May 2020 Derricks completed
21 May 2020 Derrick with eyes, ladder, spar and pulley assemblies
20 May 2020 Deck winch assembled
20 May 2020 Platforms completed, painted, varnished
20 May 2020 Hatches with ports completed, painted, varnished
19 May 2020 Platforms frames assembled
18 May 2020 Hatch covers 14 to 21 completed
18 May 2020 Funnel assembly completed
17 May 2020 Two round houses with radar antenna
17 May 2020 Three side ladders completed with rails. Chests assembled, glued, finished
16 May 2020 Wooden sections of three side ladders assembled, glued
16 May 2020 Steps and stantions from main deck to fore and quarter decks
16 May 2020 Stern rudder housing completed
15 May 2020 Trimming decks and stern rudder housing
14 May 2020 Cabin completed
14 May 2020 Bow rudder housing with fuel tank
13 May 2020 Three basic deckhouses completed & painted; cabin, bow rudder, stern rudder
13 May 2020 Three deckhouses prepared; cabin, bow rudder, stern rudder
12 May 2020 Hull completed ready for fitting out
